Block Forks
- Pallet Forks - Lip Mount
Forks - Bucket Forks
Replacements for most machines
Back
to Top
All classes and sizes available
Back
to Top
2,500 lb. to 10,000 lb. Ratings
Model |
Thickness |
Width |
Tine |
Weight |
LMF2500 |
1.5" |
3" |
42" |
250 Pr. |
LMF4000 |
1.5" |
4" |
42" |
301 Pr. |
LMF6000 |
1.75" |
4" |
48" |
336 Pr. |
LMF8000 |
2" |
4" |
48" |
468 Pr. |
LMF10000 |
2" |
5" |
48" |
564 Pr. |
Back
to Top
Fits all tractors, backhoes and
wheel and track loaders rated from 2,500 lbs. to 17,000 lbs.
Features:
-
ASI forks are easy to install
-
ASI forks include all hardware
needed to mount on your machine
-
The operator does not need to
get off the loader to connect or disconnect from the forks
Attachment Sales, Inc. Bucket Forks are SOLID STEEL
"FORGED" tines with a true 3:1 strength factor.
Two main points must be considered when selecting
"FORGED" Bucket Forks.
- The Lifting
Capacity of Your Machine
The lift capacity of the forks should exceed the lift capacity
of the machine, so the load is limited by the weight of the machine,
NOT THE FORKS.
- The Vertical
Opening of the Bucket
The back height of the FORK should be six inches or higher than
the distance from the cutting edge to the top of the bucket.
SPECIFICATIONS
(Always measure bucket opening before ordering)
Fork Set
Capacity |
Fork
Dimensions |
Tine
Length |
Vertical
Back Height |
Shaft
Size |
Mounting
Brackets |
Set
Weight |
2500# |
1.5 x 3 |
42" |
42" |
60" |
3 |
282 |
4000# |
1.5 x 3 |
42" |
48" |
80" |
4 |
332 |
5000# |
1.5 x 4 |
48" |
48" |
80" |
4 |
436 |
6000# |
1.75 x 4 |
48" |
55" |
80" |
4 |
510 |
8000# |
2.00 x 4 |
48" |
66" |
80" |
5 |
621 |
10,000# |
2.00 x 5 |
48" |
74" |
80" |
5 |
801 |
17,000# |
2.50 x 6 |
54" |
74" |
80" |
5 |
1201 |
Specifications are subject
to change without notice.
Bucket Fork sets
come complete with forks, 2" cold roll steel shaft, locking
collars and bucket hooks.
Click images below
to enlarge
Back
to Top
|
